4 × 4 m, 16 m² covered
Four corner feet, one mast
A clear square floor, no centre upright
COL440 and ZP440
Two ranges publish a 4x4, 18 cm apart at the point and 11 kg apart on the scales. Read the apex column first: both stand over 4 m, which changes how the structure is used.
| Range | 4x4 model | Frame | Weight | Packed size | Apex height | Feet / masts | Warranty | Wind rating | Walls | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CO | COL440 | Octagonal aluminium, 60mm | 34 kg | 2.04 x 0.32 x 0.32 m | 4.09 m | 4 feet, 1 mast | 5-year | 60mph | Velcro-attached | On quotation | CO 4x4 details |
| ZP | ZP440 | Grooved anodised aluminium, Ø50mm, 2mm wall | 45 kg | 2.08 x 0.37 x 0.37 m | 4.27 m | 4 feet, 1 mast | 10-year | 60mph | Sliding wall + bottom tension bar | On quotation | ZP 4x4 details |
Also available at 4 × 4 m: the Pagode and the GP. Specification on request.
Ratings assume anchoring and ballast: how the rule works. Certification evidence on request, for the exact model.
The single-mast square
A 4x4 spans its whole 16 m² from the corners with a single mast overhead. Nothing stands in the middle of the floor and nothing lands mid-wall. Furniture is laid out to the room rather than around a leg, and every one of the four 4 m sides is an unbroken run.
A 4x4 covers 16 m² and a 3x6 covers 18, so the two are close on paper and different in use. The rectangle gives 6 m of frontage and 3 m of depth. The square gives 4 m in both directions and four sides of equal length. The difference is shape, not area.
COL440 stands 4.09 m to the point, 72 cm above a 3 m CO. ZP440 stands 4.27 m, and both stand 2.55 m to the roof edge. The ZP profile is specified as a taller leg, roof spike and valence, giving a larger surface for branding.
Plan 49 kg per foot against a 30 mph gust, rising to 81 kg if the site sees 50. Across four feet that is 196 kg at the low end and 324 kg at the high, holding down 16 m² with no intermediate anchor point to help. For the full 60 mph rating LP Tent specifies 130 kg per leg on hard standing, or stakes with 150 kg of pull-out on soft ground.
COL440 packs to 2.04 m and ZP440 to 2.08 m, against 1.55 m and 1.60 m for the 3 m sizes: roughly 48 cm more packed length, and the figure to check against your load space. Weights are 34 kg and 45 kg.
The space calculator gives 21 standing, 14 in seated rows or 8 at dining tables at normal circulation. CO and ZP publish full figures; Pagode and GP are made at 4×4m as well and their specification comes with the quote. Where the roof profile is part of the look rather than a working cover, the Pagode is the one to ask about.
Every side is 4 m, so walls, doors and printed panels are interchangeable between them. The ZP and Pagode sliding-wall system with a bottom tension bar holds a 4 m panel flat.
Tell us what the job needs. A specified quote comes back within 1 business day.
Before you order a 4x4
16 m² on four corner legs and nothing in between: 196 kg of ballast for a 30 mph gust, 324 kg for 50 mph.
Artwork, panels and the tension bar.
Sections, leg locks and connectors.
A guided comparison, range by range.
Model COL440: 34 kg, 4.09 m apex, 4 feet, 1 mast.
Model ZP440: 45 kg, 4.27 m apex, 4 feet, 1 mast.
Tell us the clearance you need and how the sides are walled, and the specification comes back within 1 business day.
4x4 gazebos
No. It stands on its four corners with a single mast over the centre of the roof, so the 16 m² of floor is clear and no leg lands mid-wall.
To the apex, 4.09 m on the COL440 and 4.27 m on the ZP440. To the roof edge, 2.55 m on both, with the valance hanging below that.
2.04 x 0.32 x 0.32 m on the COL440 at 34 kg, and 2.08 x 0.37 x 0.37 m on the ZP440 at 45 kg. That is roughly 48 cm longer than any 3 m size, so it is worth measuring before you order.
CO and ZP publish measured 4x4 models, COL440 and ZP440. Pagode and GP are also built at 4×4m on the ZP framework; they carry no published dimensions table, so their figures come with the quote rather than off a page.
